Filter

  1. braun
  2. rot|grün
  1. Quader
  2. Ring
  3. Scheibe
  1. Y30
  2. Y35
Tower Banner

Ferrite Magnets

are also known as Ceramic Magnets, Ceramic Ferrite Magnets are the best value permanent magnet available due to an abundance of raw materials and economical cost to manufacture. They are ideal for creating a deep magnetic field inexpensively. Ferrite magnets are extremely popular due to their characteristics. Ceramic magnets are a cost effective option for high volume applications. Ceramic magnet alloys offer good resistance to external demagnetization fields. Commonly used in motors, speakers and work holding assemblies.

Set Descending Direction
Set Descending Direction

12 Article variants


Ferrite / Ceramic permanent magnets

Permanent ferrite magnets, often known as ceramic magnets, are frequently used as a cheap alternative to rare-earth magnets when strength is not critical. The most common uses of ferrite magnets include fridge magnets, brakes, clamps, loudspeakers, security systems, medical instruments and a wide range of other applications.

Ferrite is a ceramic material, made using iron oxide and small amounts of other metallic elements, such as strontium, nickel, manganese and zinc. Ferrite is electrically non-conductive, which means ferrite magnets act as insulators, and can either be magnetised (hard ferrite) or attracted to a magnet (soft ferrite).

Hard ferrite, also called sintered ferrite, is the permanent magnet form of the material and is difficult to demagnetise. They’re often used for loudspeakers, refrigerator magnets and electrical motors. Soft ferrites, on the other hand, are conductors of magnetic fields and can easily change their magnetisation. They’re often used as magnetic cores (known as ferrite cores) in the electronics industry, useful for transformers, high-frequency inductors and microwaves.


Ferrite Magnets / Hard Ferrite

We specialize in industrial Ceramic magnets for sale online carries a large inventory of ceramic disc, block (rectangular & square), and ring magnets, available for immediate purchase in a wide range of shapes and sizes. Ferrite magnets, also known as ceramic magnets. The Ferrite permanent magnet is also known as a Ceramic Magnet and even as hard ferrite magnet. We offer a large inventory of ceramic disc, block (rectangular & square), and ring magnets.

Hard ferrite ceramic (Hard Ferrite) magnets were developed in the 1960’s as a low cost alternative to metallic magnets. Compared with other permanent magnet materials they exhibit low energy and relatively brittle and hard, ferrite magnets have won wide acceptance due to their good resistance to demagnetization, excellent corrosion resistance and low price per pound. It is the first choice for most types of DC motors, magnetic separators, magnetic resonance imaging and automotive sensor.

Buy ceramic magnets on-line today. Magnosphere carries a large inventory of ceramic disc, block (rectangular & square), and ring magnets, available for immediate purchase in a wide range of shapes and sizes.

Ceramic magnets (also known as "Ferrite" magnets) are part of the permanent magnet family, and the lowest cost, hard magnets available today. Ceramic magnets are used for many consumer & commercial applications such as craft projects, refrigerator magnets, badge holders, latches, display boards, motors, lifting magnets, science projects, toys, games, POP displays, advertising giveaways & much more. We can also custom manufacture ceramic magnets to fit your exact specifications using our in-house global manufacturing facilities and experienced team of engineers.


Ferrite

Hard ferrite ceramic (Hard Ferrite) magnets were developed in the 1960’s as a low cost alternative to metallic magnets. Compared with other permanent magnet materials they exhibit low energy and relatively brittle and hard, ferrite magnets have won wide acceptance due to their good resistance to demagnetization, excellent corrosion resistance and low price per pound. It is the first choice for most types of DC motors, magnetic separators, magnetic resonance imaging and automotive sensor.


Features & Characteristics of Ceramic Magnets:

  • What are the main characteristics for ceramic magnets? Ceramic magnets are medium in magnetic strength, and can be used at fairly high temperatures. They are low cost, making them ideal for applications such as automotive sensors, magnetic separators, craft projects, badge holders, latches, display boards, science projects, toys, games & more.
  • What grades & shapes are available for ceramic magnets? Grades 5 (most commonly used) through 8 are available in disc, block (rectangle & square) and ring shapes, and can be custom manufactured to meet your specialty requirements.
  • What are the temperature constraints for ceramic magnets? Ceramic magnets can be used at fairly high temperatures, although their magnetic properties drop with temperature. At 175°C (350° F), approximately 75% of their room temperature magnetic properties are retained. How are magnets rated? Magnets are typically rated by their residual induction, coercive force & maximum energy product. Click here for more details (section 4.0). This refers to the maximum strength that the magnetic material can be magnetized to.
  • What are some common applications for ceramic magnets? Common applications for ceramic magnets include raft projects, refrigerator magnets, badge holders, latches, display boards, loudspeakers, security systems, motors, generators & alternators, lifting magnets, eddy current devices, brakes, clamps, switches & relays, sweeper magnets, science projects, toys, games, motors, magnetic couplings, POP displays, advertising giveaways, promotional items, novelties & more.
  • Are there machining constraints for ceramic magnets? Ceramic magnets require special machining techniques, and should be machined in an “un-magnetized” state. We are fully equipped to machine these materials to your specifications, just let us know what you are looking for by sending us a special request.
  • Are surface treatments required for ceramic magnets? Ceramic magnets do not need to be protected for surface rust. A thin film of magnet powder on the surface is common.
  • What are some bonding applications for ceramic magnets? Ceramic magnets are often assembled into products using "superglues" such as Loctite 325 or other epoxies. Please always ensure that bonding surfaces are clean and dry prior to bonding.
  • What safety precautions should be taken into consideration when working with ceramic magnets? Ceramic Magnets are hard & brittle, and they can chip or break if dropped or snapped together, so please take special care when handling these magnets!
  • <

Available Grades of Ceramic Magnets:

Magnosphere offers Ceramic Magnets in a variety of grades, including Ceramic 1, Ceramic 5, Ceramic 8, and Ceramic 8B in strengths ranging from 1.05 – 3.8 MGOe.


Corrosion Resistance:

Ceramic magnets are very resistant to corrosion. Coatings can be applied for cosmetic reasons or to reduce the fine, ferrite powder which is associated with ceramic magnets.


Temperature Effects:

Ceramic Magnets are susceptible to demagnetization when exposed to temperature extremes. There are grades which have better resistance to high and low temperatures, but several factors will dictate the performance of a ferrite magnet.


Magnetization Options:

Although most commercial magnets are anistropic, which means they have a preferred direction of magnetization, various pole configurations can be achieved without conflicting with a Ceramic Magnet’s orientation.


Compliance and Intellectual Property Considerations:

Ceramic magnets manufactured by Magnosphere are compliant with Intellectual Property Rights, Environmental Restrictions, and Conflict Mineral usage.

  • Dodd Frank Wall Street Reform Act (Section 1502
  • RoHS, RoHS II and REACH

    Handling and Storage of Ceramic Magnets:

    Ceramic Magnets are very strong and brittle, requiring appropriate handling and packing to ensure safety and prevent damage.


    Ceramic Magnet Manufacturing Methods:

    Ceramic or Ferrite Magnets are produced by calcining a mixture of iron oxide and strontium carbonate to form a metallic oxide. A multiple stage milling operation reduces the calcined material to a small particle size. The powder is then compacted in a die by one of two methods. In the first method, the powder is compacted dry which develops an isotropic magnet with weaker magnetic properties, but with better dimensional tolerances. Oftentimes, a dry pressed magnet does not require finish grinding. In the second method, the powder is mixed with water to form slurry. The slurry is compacted in a die in the presence of a magnetic field. The applied field creates an anisotropic magnet which exhibits superior magnetic properties, but usually requires finish grinding. The compacted parts which approximate the finished geometry are then sintered at high temperatures to achieve the final fusion of the individual particles. Final shaping is achieved by diamond abrasives. Usually the pole faces of the ceramic (ferrite) magnets will be ground and the remaining surfaces will exhibit “as sintered” tolerances and physical characteristics.


    Spplier of Rare Earth Magnet, ferrite magnets and permanent magnets

    Our magnetic product assortment includes: disc magnets, ring magnets, magnetic spheres, block magnets, pot magnets, clamping magnets, car roof magnets, ceiling magnets, switching magnets, lifting magnets, flexible rubber magnets, sheet magnets, tape magnets, steel tape, notice boards, notice board magnets, magnetic paper, fridge magnets, business card conversions, magnetic sweepers, magnetic separation rod magnets, separator grids, compasses, gaussmeters, magnetic viewing film, iron filings, experiment kits, generator magnets, reed switch magnets, educational magnets.


    We ship our Magnets worldwid via Sea or Air Shipment


    Buy high quality Ceramic Ferrit Magnets at Magnosphere and get a better deal!

    Magnosphere produces magnets at great prices, produced and delivered on time for all areas of industry, automotive, aerospace, electronics as well as in the design sector, trade fair construction, offices and for the home.

    We are an ISO certified shop and carry the Trusted Shops seal. We have successfully completed more than 300,000 orders and offer our ever-growing customer base 24/7 customer service.

    All items are available for immediate delivery in large numbers with daily dispatch. Our selection is your win! Thousands of satisfied customers! Buy from a company with the highest quality standards and customer service with flexible and diverse payment options and conditions.

    We can also custom manufacture these to fit your exact specifications using our in-house global manufacturing facilities and team of experienced engineers. Need high quantities of magnets at the lowest and fairest price possible? Just let us know what you are looking for and contact our Customer Care Team by sending us a request for quote! We'll work with you to determine the most economical way of providing you with what you need.

    Trust in our experience and convince yourself of our service and our products and we look forward to welcoming you to our magnet shop at Magnosphere. You are welcome to contact us by eMail: info(at)magnosphere.co.uk. Available 24/7 x 365 and we are also there for you on public holidays! Or just give us a call.


    ROHS-Directive

    Magnosphere conforms to the RoHs directive and the Reach and PFOS regulations. Directive 2002/96 / EC of the European Parliament and of the Council, of January 27, 2003, on waste electrical and electronic equipment (WEEE).


    We are very proud to offer excellent customer service. We know that without our clients, we would not be here. If you have any questions about your order or something else, please call or email us! 24 / 7 x 365 Including holiday periods! Our customer service team is available to help you!

    • Hotline: +49 (0) 2241 959450
    • Telefax: +49.2241.9594520
    • eMail: info@magnosphere.co.uk